Ghost Immobiliser Installation

Add a ghost immobiliser to your car and protect it from thieves. Our TASSA-verified system protects against hacking, key cloning, and also vehicle immobiliser bypass.

The system is hidden inside the wiring loom in your vehicle, so it is completely invisible to anyone who looks. It is created by generating a pin code push sequence through buttons already on the steering wheel doors, door cards and the central console.

No circuit cuts

It's not surprising that owners want to protect the vehicle they've worked so hard to buy. Traditional security devices, like alarms or wheel locks are easily manipulated by thieves. Ghost immobilisers are highly-effective solution that operates silently and isn't detected by modern thieves.

A ghost immobiliser is a hidden device that connects to your vehicle's CAN data network to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This creates a unique pincode that is only known by you. The code can be changed at any time, and can include up to 20 digits depending on your preferences. It also has an emergency code that you could use in case you forget your PIN.

The ghost immobiliser can also be used to block relay boxes from transferring your car key's signal from inside your home, which would unlock the doors and then start the vehicle. It can also block sophisticated methods to steal your vehicle, installation such as OBD port hacking. The device is small and weatherproof, which means it's hard to spot and is even more difficult to interfere with.

Another advantage of the ghost immobiliser is that it can be put inside your car without permanent marks. This is ideal for people who plan to sell their car in the near future. It's also a lot quicker and simpler to install than an original factory-fitted system.

The Autowatch Ghost is a revolutionary next-generation device that prevents contactless stolen cars by connecting to the vehicle's CAN data network and using the existing buttons to create a unique PIN code. This is a snoopy device that can be installed with no wires cut and does not require any additional key fobs. It can also be connected to the original ECU of the vehicle, which prevents thieves from using a different key. This system has been verified by TASSA and can be linked with an International Security Register. Owners will be able to rest easy knowing that their vehicles are protected from theft.

No RF scanning

You'll want to safeguard your vehicle from theft when you have spent a lot of money and effort to customize it. Installing an immobiliser is among the best ways to stop theft. It will prevent your vehicle from starting until you enter an individual code. You can generate a 20-digit code using the buttons on your dashboard or the steering wheel. This will ensure that only you have the right to drive your vehicle. It is also possible to set up a service or installation valet mode that will allow you to start your car for a short period without having to enter the PIN code. This allows technicians to work on your vehicle without being present. This is a great feature for those who want to cut down on time and make their lives simpler.

A ghost immobiliser, a new generation device, connects to the CAN data network of your vehicle. It uses the buttons located on the dashboard and the steering wheel to create a PIN code. It is designed to blend in with the vehicle's design, as it doesn't emit any noise or light indicator. It can be put in anywhere on your vehicle without altering the look of the vehicle.

This stealthy device is TASSA approved and can reduce the cost of insurance. It has a tracking feature that allows you to locate your vehicle, even if it's stolen. This is especially useful for those who own a unique, expensive vehicle that you've put many hours customizing.

The Autowatch Ghost can be used in conjunction with an iPhone app to enable you to start your vehicle remotely if you have forgotten your PIN or are not able to access the vehicle due to a reason. This feature is great for those who need to do some errands, or drop off your kids, but do not want to risk having someone else drive your vehicle. This feature is beneficial when you need to take your car to a mechanic for service or repair.

The Ghost is unique in that it doesn't transmit or detect radio frequencies which means it's not detected by thieves who use RF scanning and code grabbing technologies. It can also protect your car against key copying and ECU swapping as well as other the most common methods used to steal cars.

There is no key to cloning

Ghost immobilisers are an excellent way to safeguard top-end vehicles and stop key cloning. They work by preventing your car from starting until an additional PIN code is entered in conjunction with the regular key fob. This makes it difficult for thieves to rob your vehicle and could deter them from doing it in the first place. This is a good idea if your vehicle has been extensively customized or if it's an uncommon model.

These immobilisers are connected to the vehicle's CAN data network and are completely concealed, meaning that their presence is not obvious. It is also impossible for a burglar to detect the device by using radio frequency scanning or code technology for grabbing. This means that a burglar would need to wait longer to steal your vehicle.

A criminal will need to know the unique pin sequence and the location of the ghost to get around it. The pin code is unique to you and you can change it as many times as you need to. The pin code is simple for you to remember but mathematically impossible for anyone else to work out. In addition the engineer will have provided you with an emergency pin code that can be used to bypass the pin in case you ever forget the pin.

The Ghost CAN Bus immobiliser could be easily installed anywhere on your vehicle. It can be used with any vehicle and can be fully customized to match your car's appearance. It is also easy to use and affordable. The device can be moved to a different vehicle, as long as it is compatible with the new vehicle.

The CAN bus immobiliser is also compatible with a variety of other security features. For example, it can detect the damage to your vehicle and notify the owner. It will also shut off the engine if it detects that the car is being manipulated. The system also protects your vehicle from key cloning and hacking. It can also detect vibrations and contact with the vehicle. It can also notify the owner when the vehicle is moved.

No OBD port hacking

Ghost uses an immobiliser that is hidden and connected to the CAN data network in your vehicle that prevents thieves from gaining access to your vehicle to disable the alarm, turn off the key fob, and then code new keys. This technology is a significant improvement over the traditional methods that have been used by thieves in the past to take your vehicle. The CAN data network means that the system won't be affected by disconnecting or changing the battery.

The Autowatch Ghost is the first immobiliser for CAN bus aftermarkets in the world, protects against key-cloning, hacking, and replica car theft. It works without LED indications or key-fobs, instead leveraging the buttons on your steering wheel, centre console and door panels to let you create a unique PIN code sequence (up to 20 button presses) that needs to be entered first before you can drive your vehicle away.

Modern thieves employ diagnostics to detect circuit cuts on your vehicle and can bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof, doesn't need any additional wiring, and can't be detected by professional diagnostic tools. It can even be installed on vehicles with anti-theft systems.

A Ghost 2 immobiliser immobiliser has another major benefit: your vehicle can only be started by someone who knows your PIN and physically has access to your vehicle. This is a major advantage over security systems that can be tampered with using simple cable manipulation, a screwdriver, or the utilisation of an universal remote controller.

If you forget your PIN you can reset it easily using the emergency PIN reset function on a cell phone or computer. This is helpful if you need to start your car when it's been left in a garage or the valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorised installers. It comes with an RFID fingerprint system that can identify parts that are not in use that allow for the return of stolen items if they are found. It can also be switched to'service mode' which permits the engine to be started when your vehicle is in a garage or if you have valet parking, but you will need to enter your PIN again to exit the vehicle.