Ghost Immobiliser Installation

Install a ghost immobiliser on your car to safeguard it from thieves. Our TASSA certified system guards vehicles from hacking, key cloning and vehicle immobiliser bypass.

The system is hidden in your vehicle's wiring loom It is inaccessible to anyone looking. It is created by generating the pin code push sequence by using buttons already present on the steering wheel doors, door cards, and the centre console.

No circuit cuts

A car is a precious possession that you spend years of hard work to acquire, so it's understandable why owners want to safeguard their vehicle from theft. Traditional security systems, such as alarms or wheel locks can be easily bypassed by thieves. A ghost immobiliser however, is a highly effective solution that operates in a quiet manner and is not easily identified by modern thieves.

ghost 2 immobiliser problems immobilisers or a hidden device, is a device that communicates with your vehicle's data network CAN to disable the engine. It does this without using key fobs or radio frequencies. It communicates with the vehicle's ECU through existing buttons on the steering wheel, dash and door panels, to create an individual pin code that only you know. The code can be altered at any time and can be as long as 20 digits long, depending on what you prefer. It also includes a secure emergency code you can use if you forget your PIN.

The ghost immobiliser can be used to stop relay boxes from transmitting your car key's signal from inside your home, which will open the doors and begin the vehicle. It also blocks advanced methods of stealing your vehicle, including OBD port hacking. The device is tiny and weatherproof, meaning it's hard to spot and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be installed to your vehicle without permanent marks. This makes it perfect for people who plan to sell their vehicle in the near future. It's also more efficient and less time-consuming to install than an original factory-fitted system.

The autowatch ghost immobiliser fitting Ghost is a groundbreaking next-generation device that can stop contactless stolen cars by connecting to the vehicle's CAN data network and utilizing existing buttons to generate a unique PIN. This is a stealthy system that can be put in place without severing any wires and does not require any additional key fobs. It also connects to the original ECU of the vehicle, preventing thieves by stealing it using a new key. This system is TASSA-certified and is compatible with an International Security Register. Owners can rest assured knowing that their vehicles are protected from theft.

No scanning with RF

If you've invested lots of time and money into the customisation of your vehicle, you'll want to protect it from theft. One way to accomplish this is to install an immobiliser, which will prevent the engine from starting until you enter a unique PIN code. You can generate a 20-digit code using the buttons on your dashboard and steering wheel. This will ensure that only you are allowed to drive your car. It is also possible to set up a service or valet mode that allows you to start your car temporarily without entering the PIN. This allows your technician to work on your car without you being there. This is a great feature for those who want to cut down on time and make their lives simpler.

A ghost immobiliser is a new generation device that connects to the vehicle's CAN data network, and uses the buttons on the steering wheel and dashboard to program a personal PIN code. It is designed to blend in with the vehicle's design, as it doesn't emit any sound or LED indicators. It can be installed anywhere on your vehicle, without altering the look of the vehicle.

This stealthy system is TASSA approved and can cut down on your insurance costs. It comes with a tracking feature that can locate your vehicle even if it's gone missing. This is a great feature when you own a unique expensive vehicle that you've spent time and effort to customize.

The autowatch ghost installers Ghost can be used together with an iPhone app to enable you to start your car remotely in the event that you forgot your PIN or not able to enter the vehicle due to some reason. This feature is ideal for those who need to do some errands, or pick up your kids and do not want to let someone else drive your vehicle. It's also useful if you need to take your vehicle in for servicing or repair.

The Ghost has the advantage that it does not transmit or detect radio frequencies and is therefore undetectable by thieves who employ RF scanning and code grabbing technologies. It can also protect your vehicle from key copying, ECU swapping and other usual methods of car theft.

No key cloning

Ghost immobilisers are a great option for protecting high-end vehicles. They are designed to prevent key copying. They stop your car from being started without a PIN code being entered in conjunction with the standard key fob. This makes it difficult for thieves to steal your vehicle, and can stop them from trying. This is a particularly good option if you've invested a lot of time and money in making your vehicle unique, or own a rare or expensive model.

These immobilisers are connected to the vehicle's onboard CAN network and are completely hidden, meaning there is no indication of its presence within the vehicle. It is also impossible for a thief to detect the device by using radio frequency scanning or code technology for grabbing. This means a thief would need to wait longer to take your vehicle.

To bypass the system thieves need to be aware of the unique pin code and the location of the ghost immobiliser fitter. The pin code is unique to you and can change it as many times as needed. The pin code you select is easy to remember, but mathematically impossible for anyone else to figure out. In addition the engineer will provide you with a backup PIN code that can be used to bypass the pin in case you ever forget the pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any part of your vehicle. It works with any vehicle and can be fully customizable to match your car's style. It is also affordable and easy to use. The device can be moved to a different vehicle, provided that it is compatible with the new vehicle.

The CAN bus immobiliser is also compatible with a variety of other security features. For instance, it could detect the damage to your vehicle and alert the owner. It will also shut off the engine in the event that the vehicle has been damaged. The system will safeguard your vehicle from hacking and key duplicate. It also detects vibrations and contact with the vehicle. Additionally, it will alert the owner if the vehicle has been moved.

No OBD port hacking

Ghost uses an immobiliser hidden in the module that is connected to the CAN data network of your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, or deactivate the key fob and generate new keys. This technology is an enormous improvement over the traditional methods used by thieves in the past to take your vehicle. The CAN data network also means that the system will not be affected by disconnecting or replacing the battery.

The autowatch ghost installer Ghost, the first non-detectable CAN bus immobiliser aftermarket worldwide, safeguards against key-cloning, hacking, and replica car theft. It doesn't use LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves use diagnostics to identify circuit cuts on your vehicle and can bypass immobilisers that require lots of wiring or are incorporated into the wiring. The Ghost is weatherproof, does not require additional wiring and isn't detected by professional diagnostic tools. It can even be fitted on vehicles with anti-theft devices.

Another advantage of the Ghost immobiliser is that your vehicle is only able to be started by a person who knows the PIN code and has physical access to your car. This is a significant advantage over security systems that can be bypassed with simple cable tampering, a screwdriver or the utilisation of a universal remote controller.

If you forget your PIN, you can reset it easily by using the emergency PIN override function on a cell phone or computer. This is useful if you are looking to start your vehicle after having left it in a garage, or using the valet parking service.

The autowatch ghost installation walsall Ghost 2 has been certified for insurance by TASSA and is able to be installed by our authorised installers. It comes with a QR fingerprint system to identify parts that are not in use that allows for the return of stolen items in the event that they are discovered. It can also be turned into a service mode' which permits the engine to be started when your vehicle is in a garage, or if you have valet parking, however, you'll need to enter your PIN again to exit the vehicle.