Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. It's discreet and does not require any additional key fobs in order to operate.

The device utilizes buttons in your vehicle (steering wheel, door panels & centre console) to create a unique changeable pin code sequence up to 20 presses long. This then authorizes the vehicle to start.

Simple PIN code Change Process

With the increasing rate of vehicle theft, many owners are looking to upgrade their security. There are many kinds of aftermarket security devices, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system can assist in finding your car in the case of theft, it can not prevent the crime from occurring in the first place. Immobilisers, in contrast, do exactly what they say on the tin: they disable your car's motor so that it isn't able to be started. The Autowatch ghost installations is one of the most sophisticated options available, making it nearly impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car The ghost device is able to create a unique sequence which must be entered before the car's engine starts. This can be accomplished by using the heater, window or indicator stalk buttons. In addition to this it is possible to use an app on mobile that acts as an emergency PIN code override and allows the driver to operate the car without having to use the button sequence. This option is particularly useful when you need to surrender your car for valet parking or servicing because the immobiliser will remain active and not deactivated.

The Ghost is an innovative and unique device that works by using your vehicle's buttons rather than as a separate unit. It's not just an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you own. This makes it a far more cost-effective option than a traditional wheel lock.

Weatherproof small device

The autowatch ghost installation walsall ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking and ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be installed in the vehicle without the need for additional wiring, and has been thoroughly tested to make sure it works with all vehicles. It is also immune to jamming devices which are a typical method used by car thieves to bypass immobilisers.

The advantage of CAN data over traditional systems is that they work silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as identified by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, centre console, or doors, to create a unique disarming sequence. This sequence can be extended 20 or more presses for extra security. The iPhone app only allows one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The ghost 2 immobiliser cost also stops thieves from stealing the key to a new car immobiliser ghost (mouse click the up coming webpage) or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started when a valid PIN code has been entered. It can also be put into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) so that you can hand your car over to a valet service or for maintenance without having to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and stop your car from starting normally until you enter a custom code. The system can be turned on or off through your smartphone's app without the need for extra wires.

The standard factory immobilisers work by using a transponder that is embedded in the key. This sends a message to the ECU. The car will start if the correct code is transmitted. If, however, the transponder from a different vehicle is used instead, the immobiliser won't recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way thieves could take your vehicle is physically towing it away, and even then they would not be capable of driving it.

lamborghini ghost installer makes use of the buttons on your vehicle, including the indicator stalk, steering wheel and door panels to generate a unique, changeable PIN code sequence that must be entered before you can use your car. This is done without the need for additional hardware, such as key fobs and can be as long as 20 presses long. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, which means thieves cannot make use of sophisticated RF scanners or code grabbing technologies to identify that the system has been set up.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is covertly integrated into the vehicle so it can't be removed or disabled by thieves and is also harder to remove than a car alarm that requires disarming with an action sequence. This makes it an excellent complement to a GPS tracker which helps locate your car after it's been taken.

Emergency PIN code override

You don't have to look far on social media for stories or videos of vehicles that have been stolen with the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle without your original keys.

Our Ghost immobiliser is specifically designed to prevent this, and give you an additional layer of security in order to keep your vehicle from being targeted by thieves. It generates a unique pin code by pressing the buttons on your steering wheel, door panel, and centre console. The unique pin code must be entered together with your original key fob to stop the vehicle from getting started. The unique override pin is located on a black card which you will receive following your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden within the wiring of the vehicle and does not emit radio signals. This means it can't be detected using diagnostic software which can identify the security system you have installed. This makes it an excellent alternative to a tracking device.

In contrast to other security systems that have an engine relay bay, CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This allows them to block a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker to these systems, but this has to be specified prior to installing the device. They are also fully service/valet mode-compatible and a good alternative to a tracker if you are having your car in for an electrical fault at the dealers.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles being stolen with the owners' keys. It's easier than ever to steal your pride and joy thanks to the availability of key cloning tools and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if your keys have been cloned.

It connects directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it does not use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also protects against adding an additional key or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.

The device is hidden within your car and can be accessed by existing buttons on your steering wheel, center console, and door panels. Before you can begin your car, you must enter a unique and changeable PIN number that is up to 20 numbers.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car from being driven away or started without a PIN code being entered first. If the device is in armed and you try to drive away, it will display a warning on your dash, which will flash on a regular basis for approximately 300m. If you enter your PIN code at this point it will disable the anti-hijack and your car will continue to drive just as normal. If you don't enter your PIN at this point the indicator will continue to flash and require a new PIN code every time you try to start your car.